Hello, I am Looky.Xu, here I will tell you how to DIY your smart controller.
Today I will help you control your computer with EACHEN GD-DC5 device. Then you can turn ON/OFF from anywhere and konw the status of your computer at any time.
What we need：
1th Step: Open your computer and find out the two wires of the POW key.
2nd Step: Peel off the wires with a knife carefully.
3rd Step: Connect the Red&Black wires of the EACHEN GD-DC5 to the two wires.
4th Step: Power up the GD-DC5 from the USB port of the computer. If the USB ports are without 5V output when your computer is shut down, then you have to use a USB adapter to power up the GD-DC5, and you can’t check the status of your computer. If the USB ports can power up the GD-DC5, congratulation，you can continue for next step.
5th Step: Connect the right one pin to the POW LED wire. Then you can monitor the status of your computer on APP.
6th Step: Fix the GD-DC5 well and add it to your APP. Finish.
